비데 필터 교환 Bidet filter replacement

Today, I will tell you how to replace the bidet filter, which is popular in any home these days, by yourself.

In fact, these days, a lot of rental water purifiers and bidet air purifiers are being used, so company employees come and filter and clean them themselves, but at my house, we use rental air purifiers and water purifiers, but we purchase bidets and use them.

After we first bought it, we applied for a filter replacement, so we exchanged it after the driver’s visit, but each replacement cost about 20,000 to 30,000 won. And it’s so easy to change the filter, so my house has been replacing it on its own for about 2 years. 비데 필터 교환

 

I will explain how to replace the bidet at my house with a self-bidet filter based on Oriental and SK Magic filters. 좋은뉴스 

비데 필터 교환

 

 

If you search for a bidet magic filter on the Internet or search for the model name filter you are using at home, you can purchase it from an Internet shopping mall that is on sale. Based on the filter we use in our house, you can purchase it for 7,000 won to 10,000 won for two.

 

 

 

See the reverse side for details on how to replace the filter.

1. After removing the power plug from the outlet, be sure!!! close the middle valve

2. After removing the old filter from the T-type valve, combine the new filter to the T-type valve.

3. Open the middle valve a little and let the water flow through the filter for about 1~2 minutes, then close the middle valve again.

4. After removing the ‘ㄱ’-shaped fitting from the old filter using a tool, insert the new filter into the ‘ㄱ’-shaped fitting. (If there is no tool, you can use a knife, ruler, spoon, etc.)

5. Open the middle valve to supply water to the bidet and insert the power plug into the outlet.

 

 

1. Prior to filter replacement, be sure to turn off the power and close the water supply valve.

 

 

 

2. In the ‘a’ part, if you remove the part connected to the filter, not the part connected to the lake, the lake valve side and the filter part are separated.

 

 

 

3. After removal, wait until the water remaining in the filter comes out.

 

 

 

4. If the water remaining in the filter is removed, turn the filter to remove it.

 

 

 

5. After removing the caps on both sides of the filter to be replaced, connect the filter and the drain pipe.

 

 

 

6. Combine a new filter, open the water supply pipe, check if water leaks, and if there is no leak, turn on the bidet power and use it.

 

Since there is such a simple method, the replacement cost of about 20,000 to 30,000 won was spent by replacing the filter through the technician every time, but since we purchased it online and replaced it ourselves, we saved money, so we bought it online every time to replace the bidet filter. I am replacing by myself.

We change the filter every 2-3 months. Buying a filter online is cheap, so I try to replace it often.